Homepage > Publications

Publications

(Names of supervised students/postdoctoral students by Dr. Jabareen are underlined and Italic, other students/postdoctoral students and supervised researchers are underlined)

—————————————————————————————————————————————————–
Year = 2020

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2019

  • Saksala T., Jabareen M. (2019) “Numerical modeling of rock failure under dynamic loading with polygonal elements.” International Journal for Numerical and Analytical Methods in Geomechanics, 43, 2056 – 2074.
  • Bishara D., Jabareen M. (2019) “A reduced mixed finite element formulation for modeling the viscoelastic response of electroactive polymers at finite deformation,” Mathematics and Mechanics of Solids, 24(5), 1578–1610.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2018

  • Jabareen M., Mtanes E. (2018) “A solid-shell Cosserat point element for the analysis of geometrically linear and nonlinear laminated composite structures,” Finite Elements in Analysis and Design, 142, 61-80.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2017

  • Weickenmeier J., Jabareen M., Reverend B., Ramioli M., Mazza E. (2017) “Experimental and numerical characterization of the mechanical masseter muscle response during mastication,” Journal of Biomechanical Engineering, Transaction of the ASME, 139(12) 121007.
  • Ferreira J.P.S., Parente M.P.L., Jabareen M., Natal Jorge R.M. (2017). “A general framework for the numerical implementation of anisotropic hyperelastic material models including non-local damage,” Biomechanics and Modeling in Mechanobiology, 16(4), 1119–1140.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2016

  • Jabareen M., Mtanes E. (2016). “A solid-shell Cosserat point element for elastic thin structures at finite deformation,” Computational Mechanics, 58(1), 59–89.
  • Jabareen M., Mtanes E. (2016). “A 3D Cosserat point element (CPE) for nonlinear orthotropic solids – generalization for an initially distorted mesh and an arbitrary direction of the material orthotropy,” International Journal for Numerical Methods in Engineering, 106(1), 3–31.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2015

  • Weickenmeier J., Jabareen M., Mazza E. (2015). “Suction based mechanical characterization of superficial facial soft tissues,” Journal of Biomechanics, 48, 4279–4286.
  • Jabareen M. (2015). “Strongly objective numerical implementation and generalization of a unified large inelastic deformation model with a smooth elastic-inelastic transition,” International Journal of Engineering Science, 96, 46–67.
  • Rubin M.B., Safadi M., Jabareen M. (2015). “A unified theoretical structure for modeling interstitial growth and muscle activation in soft tissues,” International Journal of Engineering Science, 90, 1–26.
  • Jabareen M. (2015). “On the modeling of electromechanical coupling in electroactive polymers using the mixed finite element formulation,” Procedia IUTAM, 12, 105–115.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2014

  • Weickenmeier J., Jabareen M. (2014). “Elastic-viscoplastic modeling of soft biological tissues using a mixed finite element formulation based on the relative deformation gradient,” International Journal for Numerical Methods in Biomedical Engineering, 30(11), 1238–1262.
  • Mtanes E., Jabareen M. (2014). “A plane strain quadrilateral Cosserat point element (CPE) for nonlinear orthotropic elastic materials – An extension to initially distorted geometry and general orthotropic directions,” Finite Elements in Analysis and Design, 87, 10–21.
  • Weickenmeier J., Itskov M., Mazza E., Jabareen M. (2014). “A physically motivated constitutive model for 3D numerical simulation of skeletal muscles,” International Journal for Numerical Methods in Biomedical Engineering, 30, 545–562.
  • Balakhovsky K., Jabareen M., Volokh K. Y. (2014). “Modeling rupture of growing aneurysms,” Journal of Biomechanics, 43, 653–658.
  • Jabareen M., Rubin M. B. (2014). “A six node plane strain triangular Cosserat point element (CPE) for nonlinear elasticity,” International Journal of Engineering Science, 74, 118–142.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2013

  • Hollenstein M., Jabareen M., Rubin M. B. (2013). “Modeling a smooth elastic-inelastic transition with a strongly objective numerical integrator needing no iteration,” Computational Mechanics, 52, 649–667.
  • Jabareen M., Hanukah E., Rubin M. B. (2013). “A ten node tetrahedral Cosserat point element (CPE) for nonlinear isotropic elastic materials,” Computational Mechanics, 52, 257–285.
  • Buerzle W., Haller C. M., Jabareen M., Egger J., Mallik A. S., Ochsenbein-Koelble N., Ehrbar M., Mazza E. (2013). “Multiaxial mechanical behavior of human fetal membranes and its relationship to microstructure,” Biomechanics Modeling and Mechanobiology, 12, 747–762.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2012

  • Jabareen M., Sharipova L., Rubin M. B. (2012). “Cosserat point element (CPE) for finite deformation of orthotropic materials,” Computational Mechanics, 49(4), 525–544.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2011

  • Barbarino G., Jabareen M., and Mazza E. (2011). “Experimental and numerical study on the mechanical behavior of superficial layers of the face,” Skin Research and Technology, 17, 434–444.
  • Rubin M.B., Jabareen M. (2011). “Further developments of physically based invariants for nonlinear elastic orthotropic materials,” Journal of Elasticity, 103, 289–294.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2010

  • Jabareen M., Rubin M. B. (2010). “Failures of the three-dimensional patch test for large elastic deformations,” Communications in Numerical Methods in Engineering, 26, 1618–1624.
  • Helfenstein J., Jabareen M., Mazza E., Govindjee S. (2010). “On non-physical response in models for fiber-reinforced hyperelastic materials,” International Journal of Solids and Structures, 47(16), 2056–2061.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2009

  • Jabareen M., Sheinman I. (2009). “Dynamic buckling of a beam on a nonlinear elastic foundation under step loading,” Journal of Mechanics of Materials and Structures, 4(7-8), 1365–1373.
  • Barbarino G. G., Jabareen M., Trzewik J., Nkengne A., Stamatas G., Mazza E. (2009). “Development and validation of a three dimensional finite element model of the face,” Journal of Biomechanical Engineering, Transaction of the ASME, 131(4) 041006.
  • Bauer M., Mazza E, Jabareen M., Sultan L., Bajka M., Lang U., Zimmermann R., Holzapfel G. A. (2009). “Assessment of the in vivo biomechanical properties of the human uterine cervix in pregnancy using the aspiration test. A feasibility study,” European Journal of Obstetrics and Gynecology and Reproductive Biology, S144, S77–S81.
  • Jabareen M., Mazza E., Mallik A., Bilic G., Zisch A. (2009). “Relation between mechanical properties and microstructure of human fetal membranes: an attempt towards a quantitative analysis,” European Journal of Obstetrics and Gynecology and Reproductive Biology, S144, S134–S141.
  • Jabareen M., Sheinman I. (2009). “Stability of imperfect stiffened conical shells,” International Journal of Solids and Structures, 46, 2111–2125.
  • Jabareen M. (2009). “Rigorous buckling of laminated cylindrical shells,” Thin-Walled Structures, 47(2), 233–240.
  • Jabareen M., Rubin M. B. (2009). “An improved Cosserat point element for axisymmetric problems in nonlinear elasticity: comparison with other element formulations,” Communications in Numerical Methods in Engineering, 25, 81–99.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2008

  • Barbarino G., Jabareen M., Trzewik J., Mazza E. (2008). “Physically based finite element of the face,” Lecture Notes in Computer Science, 5104, 1–10.
  • Jabareen M., Rubin M. B. (2008). “A generalized Cosserat point element (CPE) for isotropic nonlinear elastic materials including irregular 3-D brick and thin structural elements,” Journal of Mechanics of Materials and Structures, 3(8), 1465–1498.
  • Jabareen M., Rubin M. B. (2008). “A Cosserat point element (CPE) for nearly planar problems (including thickness changes) in nonlinear elasticity,” International Journal of Engineering Science, 46(10), 986–1010.
  • Jabareen M., Rubin M. B. (2008). “Modified torsion coefficients for a 3-D brick Cosserat point element,” Computational Mechanics, 41(4), 517–525.
  • Rubin M. B., Jabareen M. (2008). “Physically based invariants for nonlinear elastic orthotropic solids,” Journal of Elasticity, 90(1), 1–18.
  • Yankelevsky D. Z., Jabareen M., Abutbul A. D. (2008). “One dimensional analysis of tension stiffening in reinforced concrete with discrete cracks,” Engineering Structures, 30(1), 206–217.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2007

  • Jabareen M., Rubin, M. B. (2007). “An improved 3-D brick Cosserat point element for irregular shaped elements,” Computational Mechanics, 40(6), 979–1004.
  • Jabareen M., Rubin M. B. (2007). “Hyperelasticity and physical shear buckling of a block predicted by the Cosserat point element compared with inelasticity and hourglassing predicted by other element formulations,” Computational Mechanics, 40(3), 447–459.
  • Jabareen M., Sheinman I. (2007). “Buckling and sensitivity to imperfection of conical shells under dynamic step-loading,” Journal of Applied Mechanics, Transaction of the ASME, 74, 74–80.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2006

  • Jabareen M., Sheinman I. (2006). “Post bucking analysis of geometrically imperfect conical shells,” Journal of Engineering Mechanics, ASCE, 132(12), 1326–1334.
  • Jabareen M., Sheinman I. (2006). “Effect of the nonlinear pre-buckling state on the bifurcation point of conical shells,” International Journal of Solids and Structures, 43(7-8), 2146–2159.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2005

  • Sheinman I., Jabareen M. (2005). “Post-buckling of laminated cylindrical shells in UVW and WF formulations,” American Institute of Aeronautics and Astronautics, 43(5), 1117–1123.

—————————————————————————————————————————————————–
—————————————————————————————————————————————————–
Year = 2001

  • Eisenberger M., Jabareen M. (2001). “Axisymmetric vibrations of circular and annular plates with variable thickness,” International Journal of Structural Stability and Dynamics, 1, 195–206.
  • Jabareen M., Eisenberger M. (2001). “Free vibrations of non-homogeneous circular and annular membranes,” Journal of Sound and Vibration, 240, 409–429.

—————————————————————————————————————————————————–